Skip to content

F
flot
Commit c6ddfa56 authored by David Schnur's avatar David Schnur
Browse files
Options

Merge pull request #896 from dnschnur/license-headers 

Updated license headers for #805.
parents 8df11479 9e21074d
Show whitespace changes
Inline Side-by-side
Showing with 452 additions and 438 deletions
jquery.flot.categories.js
View file @ c6ddfa56
/*
Flot plugin for plotting textual data or categories. Consider a
dataset like [["February", 34], ["March", 20], ...]. This plugin
/* Flot plugin for plotting textual data or categories.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
Consider a dataset like [["February", 34], ["March", 20], ...]. This plugin
allows you to plot such a dataset directly.
To enable it, you must specify mode: "categories" on the axis with the
textual labels, e.g.
To enable it, you must specify mode: "categories" on the axis with the textual
labels, e.g.
$.plot("#placeholder", data, { xaxis: { mode: "categories" } });
By default, the labels are ordered as they are met in the data series.
If you need a different ordering, you can specify "categories" on the
axis options and list the categories there:
By default, the labels are ordered as they are met in the data series. If you
need a different ordering, you can specify "categories" on the axis options
and list the categories there:
xaxis: {
mode: "categories",
categories: ["February", "March", "April"]
}
If you need to customize the distances between the categories, you can
specify "categories" as an object mapping labels to values
If you need to customize the distances between the categories, you can specify
"categories" as an object mapping labels to values
xaxis: {
mode: "categories",
categories: { "February": 1, "March": 3, "April": 4 }
}
If you don't specify all categories, the remaining encountered
categories will be numbered from the max value plus 1 (with a spacing
of 1 between each).
If you don't specify all categories, the remaining categories will be numbered
from the max value plus 1 (with a spacing of 1 between each).
Internally, the plugin works by transforming the input data through an auto-
generated mapping where the first category becomes 0, the second 1, etc.
Hence, a point like ["February", 34] becomes [0, 34] internally in Flot (this
is visible in hover and click events that return numbers rather than the
category labels). The plugin also overrides the tick generator to spit out the
categories as ticks instead of the values.
Internally, the plugin works by transforming the input data through an
auto-generated mapping where the first category becomes 0, the second
1, etc. Hence, a point like ["February", 34] becomes [0, 34]
internally in Flot (this is visible in hover and click events that
return numbers rather than the category labels). The plugin also
overrides the tick generator to spit out the categories as ticks
instead of the values.
If you need to map a value back to its label, the mapping is always accessible
as "categories" on the axis object, e.g. plot.getAxes().xaxis.categories.
If you need to map a value back to its label, the mapping is always
accessible as "categories" on the axis object, e.g.
plot.getAxes().xaxis.categories.
*/
(function ($) {
......
jquery.flot.crosshair.js
View file @ c6ddfa56
/*
Flot plugin for showing crosshairs, thin lines, when the mouse hovers
over the plot.
/* Flot plugin for showing crosshairs when the mouse hovers over the plot.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The plugin supports these options:
crosshair: {
mode: null or "x" or "y" or "xy"
......@@ -8,22 +11,21 @@ over the plot.
lineWidth: number
}
Set the mode to one of "x", "y" or "xy". The "x" mode enables a
vertical crosshair that lets you trace the values on the x axis, "y"
enables a horizontal crosshair and "xy" enables them both. "color" is
the color of the crosshair (default is "rgba(170, 0, 0, 0.80)"),
"lineWidth" is the width of the drawn lines (default is 1).
Set the mode to one of "x", "y" or "xy". The "x" mode enables a vertical
crosshair that lets you trace the values on the x axis, "y" enables a
horizontal crosshair and "xy" enables them both. "color" is the color of the
crosshair (default is "rgba(170, 0, 0, 0.80)"), "lineWidth" is the width of
the drawn lines (default is 1).
The plugin also adds four public methods:
- setCrosshair(pos)
- setCrosshair( pos )
Set the position of the crosshair. Note that this is cleared if
the user moves the mouse. "pos" is in coordinates of the plot and
should be on the form { x: xpos, y: ypos } (you can use x2/x3/...
if you're using multiple axes), which is coincidentally the same
format as what you get from a "plothover" event. If "pos" is null,
the crosshair is cleared.
Set the position of the crosshair. Note that this is cleared if the user
moves the mouse. "pos" is in coordinates of the plot and should be on the
form { x: xpos, y: ypos } (you can use x2/x3/... if you're using multiple
axes), which is coincidentally the same format as what you get from a
"plothover" event. If "pos" is null, the crosshair is cleared.
- clearCrosshair()
......@@ -31,18 +33,21 @@ The plugin also adds four public methods:
- lockCrosshair(pos)
Cause the crosshair to lock to the current location, no longer
updating if the user moves the mouse. Optionally supply a position
(passed on to setCrosshair()) to move it to.
Cause the crosshair to lock to the current location, no longer updating if
the user moves the mouse. Optionally supply a position (passed on to
setCrosshair()) to move it to.
Example usage:
var myFlot = $.plot( $("#graph"), ..., { crosshair: { mode: "x" } } };
$("#graph").bind("plothover", function (evt, position, item) {
if (item) {
$("#graph").bind( "plothover", function ( evt, position, item ) {
if ( item ) {
// Lock the crosshair to the data point being hovered
myFlot.lockCrosshair({ x: item.datapoint[0], y: item.datapoint[1] });
}
else {
myFlot.lockCrosshair({
x: item.datapoint[ 0 ],
y: item.datapoint[ 1 ]
});
} else {
// Return normal crosshair operation
myFlot.unlockCrosshair();
}
......
jquery.flot.errorbars.js
View file @ c6ddfa56
/*
Flot plugin for plotting error bars, i.e. to show standard deviation
and other statistical properties in a plot.
/* Flot plugin for plotting error bars.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
Error bars are used to show standard deviation and other statistical
properties in a plot.
* Created by Rui Pereira - rui (dot) pereira (at) gmail (dot) com
This plugin allows you to plot error-bars over points. Set "errorbars"
inside the points series to the axis name over which there will be
error values in your data array (*even* if you do not intend to plot
them later, by setting "show: null" on xerr/yerr).
This plugin allows you to plot error-bars over points. Set "errorbars" inside
the points series to the axis name over which there will be error values in
your data array (*even* if you do not intend to plot them later, by setting
"show: null" on xerr/yerr).
Options for the plugin are
The plugin supports these options:
series: {
points: {
errorbars: "x" or "y" or "xy",
xerr: { show: null/false or true,
xerr: {
show: null/false or true,
asymmetric: null/false or true,
upperCap: null or "-" or function,
lowerCap: null or "-" or function,
color: null or color,
radius: null or number},
radius: null or number
},
yerr: { same options as xerr }
}
}
Each data point array is expected to be of the type
Each data point array is expected to be of the type:
"x" [x,y,xerr]
"y" [x,y,yerr]
"xy" [x,y,xerr,yerr]
"x" [ x, y, xerr ]
"y" [ x, y, yerr ]
"xy" [ x, y, xerr, yerr ]
where xerr becomes xerr_lower,xerr_upper for the asymmetric error
case, and equivalently for yerr. Eg., a datapoint for the "xy" case
with symmetric error-bars on X and asymmetric on Y would be:
Where xerr becomes xerr_lower,xerr_upper for the asymmetric error case, and
equivalently for yerr. Eg., a datapoint for the "xy" case with symmetric
error-bars on X and asymmetric on Y would be:
[x,y,xerr,yerr_lower,yerr_upper]
[ x, y, xerr, yerr_lower, yerr_upper ]
By default no end caps are drawn. Setting upperCap and/or lowerCap to
"-" will draw a small cap perpendicular to the error bar. They can
also be set to a user-defined drawing function, with (ctx, x, y,
radius) as parameters, as eg.
By default no end caps are drawn. Setting upperCap and/or lowerCap to "-" will
draw a small cap perpendicular to the error bar. They can also be set to a
user-defined drawing function, with (ctx, x, y, radius) as parameters, as eg.
function drawSemiCircle(ctx, x, y, radius){
function drawSemiCircle( ctx, x, y, radius ) {
ctx.beginPath();
ctx.arc(x, y, radius, 0, Math.PI, false);
ctx.moveTo(x - radius, y);
ctx.lineTo(x + radius, y);
ctx.arc( x, y, radius, 0, Math.PI, false );
ctx.moveTo( x - radius, y );
ctx.lineTo( x + radius, y );
ctx.stroke();
}
Color and radius both default to the same ones of the points series if
not set. The independent radius parameter on xerr/yerr is useful for
the case when we may want to add error-bars to a line, without showing
the interconnecting points (with radius: 0), and still showing end
caps on the error-bars. shadowSize and lineWidth are derived as well
from the points series.
Color and radius both default to the same ones of the points series if not
set. The independent radius parameter on xerr/yerr is useful for the case when
we may want to add error-bars to a line, without showing the interconnecting
points (with radius: 0), and still showing end caps on the error-bars.
shadowSize and lineWidth are derived as well from the points series.
*/
......
jquery.flot.image.js
View file @ c6ddfa56
/*
Flot plugin for plotting images, e.g. useful for putting ticks on a
prerendered complex visualization.
The data syntax is [[image, x1, y1, x2, y2], ...] where (x1, y1) and
(x2, y2) are where you intend the two opposite corners of the image to
end up in the plot. Image must be a fully loaded Javascript image (you
can make one with new Image()). If the image is not complete, it's
skipped when plotting.
There are two helpers included for retrieving images. The easiest work
the way that you put in URLs instead of images in the data (like
["myimage.png", 0, 0, 10, 10]), then call $.plot.image.loadData(data,
options, callback) where data and options are the same as you pass in
to $.plot. This loads the images, replaces the URLs in the data with
the corresponding images and calls "callback" when all images are
loaded (or failed loading). In the callback, you can then call $.plot
with the data set. See the included example.
A more low-level helper, $.plot.image.load(urls, callback) is also
included. Given a list of URLs, it calls callback with an object
mapping from URL to Image object when all images are loaded or have
failed loading.
Options for the plugin are
/* Flot plugin for plotting images.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The data syntax is [ [ image, x1, y1, x2, y2 ], ... ] where (x1, y1) and
(x2, y2) are where you intend the two opposite corners of the image to end up
in the plot. Image must be a fully loaded Javascript image (you can make one
with new Image()). If the image is not complete, it's skipped when plotting.
There are two helpers included for retrieving images. The easiest work the way
that you put in URLs instead of images in the data, like this:
[ "myimage.png", 0, 0, 10, 10 ]
Then call $.plot.image.loadData( data, options, callback ) where data and
options are the same as you pass in to $.plot. This loads the images, replaces
the URLs in the data with the corresponding images and calls "callback" when
all images are loaded (or failed loading). In the callback, you can then call
$.plot with the data set. See the included example.
A more low-level helper, $.plot.image.load(urls, callback) is also included.
Given a list of URLs, it calls callback with an object mapping from URL to
Image object when all images are loaded or have failed loading.
The plugin supports these options:
series: {
images: {
show: boolean
anchor: "corner" or "center"
alpha: [0,1]
alpha: [ 0, 1 ]
}
}
which can be specified for a specific series
$.plot($("#placeholder"), [{ data: [ ... ], images: { ... } ])
They can be specified for a specific series:
Note that because the data format is different from usual data points,
you can't use images with anything else in a specific data series.
$.plot( $("#placeholder"), [{
data: [ ... ],
images: { ... }
])
Setting "anchor" to "center" causes the pixels in the image to be
anchored at the corner pixel centers inside of at the pixel corners,
effectively letting half a pixel stick out to each side in the plot.
Note that because the data format is different from usual data points, you
can't use images with anything else in a specific data series.
Setting "anchor" to "center" causes the pixels in the image to be anchored at
the corner pixel centers inside of at the pixel corners, effectively letting
half a pixel stick out to each side in the plot.
A possible future direction could be support for tiling for large
images (like Google Maps).
A possible future direction could be support for tiling for large images (like
Google Maps).
*/
......
jquery.flot.js
View file @ c6ddfa56
/*! Javascript plotting library for jQuery, version 0.8 alpha.
*
* Released under the MIT license by IOLA, December 2007.
*
*/
/* Javascript plotting library for jQuery, version 0.8 alpha.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
*/
// first an inline dependency, jquery.colorhelpers.js, we inline it here
// for convenience
......
jquery.flot.navigate.js
View file @ c6ddfa56
/*
Flot plugin for adding panning and zooming capabilities to a plot.
/* Flot plugin for adding the ability to pan and zoom the plot.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The default behaviour is double click and scrollwheel up/down to zoom
in, drag to pan. The plugin defines plot.zoom({ center }),
plot.zoomOut() and plot.pan(offset) so you easily can add custom
controls. It also fires a "plotpan" and "plotzoom" event when
something happens, useful for synchronizing plots.
The default behaviour is double click and scrollwheel up/down to zoom in, drag
to pan. The plugin defines plot.zoom({ center }), plot.zoomOut() and
plot.pan( offset ) so you easily can add custom controls. It also fires
"plotpan" and "plotzoom" events, useful for synchronizing plots.
Options:
The plugin supports these options:
zoom: {
interactive: false
......@@ -22,41 +23,41 @@ Options:
}
xaxis, yaxis, x2axis, y2axis: {
zoomRange: null // or [number, number] (min range, max range) or false
panRange: null // or [number, number] (min, max) or false
zoomRange: null // or [ number, number ] (min range, max range) or false
panRange: null // or [ number, number ] (min, max) or false
}
"interactive" enables the built-in drag/click behaviour. If you enable
interactive for pan, then you'll have a basic plot that supports
moving around; the same for zoom.
interactive for pan, then you'll have a basic plot that supports moving
around; the same for zoom.
"amount" specifies the default amount to zoom in (so 1.5 = 150%)
relative to the current viewport.
"amount" specifies the default amount to zoom in (so 1.5 = 150%) relative to
the current viewport.
"cursor" is a standard CSS mouse cursor string used for visual
feedback to the user when dragging.
"cursor" is a standard CSS mouse cursor string used for visual feedback to the
user when dragging.
"frameRate" specifies the maximum number of times per second the plot
will update itself while the user is panning around on it (set to null
to disable intermediate pans, the plot will then not update until the
mouse button is released).
"frameRate" specifies the maximum number of times per second the plot will
update itself while the user is panning around on it (set to null to disable
intermediate pans, the plot will then not update until the mouse button is
released).
"zoomRange" is the interval in which zooming can happen, e.g. with
zoomRange: [1, 100] the zoom will never scale the axis so that the
difference between min and max is smaller than 1 or larger than 100.
You can set either end to null to ignore, e.g. [1, null]. If you set
zoomRange to false, zooming on that axis will be disabled.
"zoomRange" is the interval in which zooming can happen, e.g. with zoomRange:
[1, 100] the zoom will never scale the axis so that the difference between min
and max is smaller than 1 or larger than 100. You can set either end to null
to ignore, e.g. [1, null]. If you set zoomRange to false, zooming on that axis
will be disabled.
"panRange" confines the panning to stay within a range, e.g. with
panRange: [-10, 20] panning stops at -10 in one end and at 20 in the
other. Either can be null, e.g. [-10, null]. If you set
panRange to false, panning on that axis will be disabled.
"panRange" confines the panning to stay within a range, e.g. with panRange:
[-10, 20] panning stops at -10 in one end and at 20 in the other. Either can
be null, e.g. [-10, null]. If you set panRange to false, panning on that axis
will be disabled.
Example API usage:
plot = $.plot(...);
// zoom default amount in on the pixel (10, 20)
// zoom default amount in on the pixel ( 10, 20 )
plot.zoom({ center: { left: 10, top: 20 } });
// zoom out again
......@@ -68,18 +69,16 @@ Example API usage:
// pan 100 pixels to the left and 20 down
plot.pan({ left: -100, top: 20 })
Here, "center" specifies where the center of the zooming should
happen. Note that this is defined in pixel space, not the space of the
data points (you can use the p2c helpers on the axes in Flot to help
you convert between these).
Here, "center" specifies where the center of the zooming should happen. Note
that this is defined in pixel space, not the space of the data points (you can
use the p2c helpers on the axes in Flot to help you convert between these).
"amount" is the amount to zoom the viewport relative to the current
range, so 1 is 100% (i.e. no change), 1.5 is 150% (zoom in), 0.7 is
70% (zoom out). You can set the default in the options.
"amount" is the amount to zoom the viewport relative to the current range, so
1 is 100% (i.e. no change), 1.5 is 150% (zoom in), 0.7 is 70% (zoom out). You
can set the default in the options.
*/
// First two dependencies, jquery.event.drag.js and
// jquery.mousewheel.js, we put them inline here to save people the
// effort of downloading them.
......@@ -90,7 +89,6 @@ Licensed under the MIT License ~ http://threedubmedia.googlecode.com/files/MIT-L
*/
(function(E){E.fn.drag=function(L,K,J){if(K){this.bind("dragstart",L)}if(J){this.bind("dragend",J)}return !L?this.trigger("drag"):this.bind("drag",K?K:L)};var A=E.event,B=A.special,F=B.drag={not:":input",distance:0,which:1,dragging:false,setup:function(J){J=E.extend({distance:F.distance,which:F.which,not:F.not},J||{});J.distance=I(J.distance);A.add(this,"mousedown",H,J);if(this.attachEvent){this.attachEvent("ondragstart",D)}},teardown:function(){A.remove(this,"mousedown",H);if(this===F.dragging){F.dragging=F.proxy=false}G(this,true);if(this.detachEvent){this.detachEvent("ondragstart",D)}}};B.dragstart=B.dragend={setup:function(){},teardown:function(){}};function H(L){var K=this,J,M=L.data||{};if(M.elem){K=L.dragTarget=M.elem;L.dragProxy=F.proxy||K;L.cursorOffsetX=M.pageX-M.left;L.cursorOffsetY=M.pageY-M.top;L.offsetX=L.pageX-L.cursorOffsetX;L.offsetY=L.pageY-L.cursorOffsetY}else{if(F.dragging||(M.which>0&&L.which!=M.which)||E(L.target).is(M.not)){return }}switch(L.type){case"mousedown":E.extend(M,E(K).offset(),{elem:K,target:L.target,pageX:L.pageX,pageY:L.pageY});A.add(document,"mousemove mouseup",H,M);G(K,false);F.dragging=null;return false;case !F.dragging&&"mousemove":if(I(L.pageX-M.pageX)+I(L.pageY-M.pageY)<M.distance){break}L.target=M.target;J=C(L,"dragstart",K);if(J!==false){F.dragging=K;F.proxy=L.dragProxy=E(J||K)[0]}case"mousemove":if(F.dragging){J=C(L,"drag",K);if(B.drop){B.drop.allowed=(J!==false);B.drop.handler(L)}if(J!==false){break}L.type="mouseup"}case"mouseup":A.remove(document,"mousemove mouseup",H);if(F.dragging){if(B.drop){B.drop.handler(L)}C(L,"dragend",K)}G(K,true);F.dragging=F.proxy=M.elem=false;break}return true}function C(M,K,L){M.type=K;var J=E.event.handle.call(L,M);return J===false?false:J||M.result}function I(J){return Math.pow(J,2)}function D(){return(F.dragging===false)}function G(K,J){if(!K){return }K.unselectable=J?"off":"on";K.onselectstart=function(){return J};if(K.style){K.style.MozUserSelect=J?"":"none"}}})(jQuery);
/* jquery.mousewheel.min.js
* Copyright (c) 2011 Brandon Aaron (http://brandonaaron.net)
* Licensed under the MIT License (LICENSE.txt).
......
jquery.flot.pie.js
View file @ c6ddfa56
/*
Flot plugin for rendering pie charts.
/* Flot plugin for rendering pie charts.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The plugin assumes that each series has a single data value, and that
each value is a positive integer or zero. Negative numbers don't make
sense for a pie chart, and have unpredictable results. The values do
NOT need to be passed in as percentages; the plugin will calculate the
total and per-slice percentages internally.
The plugin assumes that each series has a single data value, and that each
value is a positive integer or zero. Negative numbers don't make sense for a
pie chart, and have unpredictable results. The values do NOT need to be
passed in as percentages; the plugin will calculate the total and per-slice
percentages internally.
* Created by Brian Medendorp, June 2009
* Updated November 2009 with contributions from: btburnett3, Anthony Aragues and Xavi Ivars
* Created by Brian Medendorp
* Changes:
2009-10-22: lineJoin set to round
2009-10-23: IE full circle fix, donut
2009-11-11: Added basic hover from btburnett3 - does not work in IE, and center is off in Chrome and Opera
2009-11-17: Added IE hover capability submitted by Anthony Aragues
2009-11-18: Added bug fix submitted by Xavi Ivars (issues with arrays when other JS libraries are included as well)
* Updated with contributions from btburnett3, Anthony Aragues and Xavi Ivars
Available options are:
series: {
The plugin supports these options:
series: {
pie: {
show: true/false
radius: 0-1 for percentage of fullsize, or a specified pixel length, or 'auto'
......@@ -55,7 +49,7 @@ series: {
opacity: 0-1
}
}
}
}
More detail and specific examples can be found in the included HTML file.
......
jquery.flot.resize.js
View file @ c6ddfa56
/*
Flot plugin for automatically redrawing plots when the placeholder
size changes, e.g. on window resizes.
/* Flot plugin for automatically redrawing plots as the placeholder resizes.
It works by listening for changes on the placeholder div (through the
jQuery resize event plugin) - if the size changes, it will redraw the
plot.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
There are no options. If you need to disable the plugin for some
plots, you can just fix the size of their placeholders.
*/
It works by listening for changes on the placeholder div (through the jQuery
resize event plugin) - if the size changes, it will redraw the plot.
There are no options. If you need to disable the plugin for some plots, you
can just fix the size of their placeholders.
*/
/* Inline dependency:
* jQuery resize event - v1.1 - 3/14/2010
......@@ -19,8 +19,8 @@ plots, you can just fix the size of their placeholders.
* Dual licensed under the MIT and GPL licenses.
* http://benalman.com/about/license/
*/
(function($,h,c){var a=$([]),e=$.resize=$.extend($.resize,{}),i,k="setTimeout",j="resize",d=j+"-special-event",b="delay",f="throttleWindow";e[b]=250;e[f]=true;$.event.special[j]={setup:function(){if(!e[f]&&this[k]){return false}var l=$(this);a=a.add(l);$.data(this,d,{w:l.width(),h:l.height()});if(a.length===1){g()}},teardown:function(){if(!e[f]&&this[k]){return false}var l=$(this);a=a.not(l);l.removeData(d);if(!a.length){clearTimeout(i)}},add:function(l){if(!e[f]&&this[k]){return false}var n;function m(s,o,p){var q=$(this),r=$.data(this,d);r.w=o!==c?o:q.width();r.h=p!==c?p:q.height();n.apply(this,arguments)}if($.isFunction(l)){n=l;return m}else{n=l.handler;l.handler=m}}};function g(){i=h[k](function(){a.each(function(){var n=$(this),m=n.width(),l=n.height(),o=$.data(this,d);if(m!==o.w||l!==o.h){n.trigger(j,[o.w=m,o.h=l])}});g()},e[b])}})(jQuery,this);
(function($,h,c){var a=$([]),e=$.resize=$.extend($.resize,{}),i,k="setTimeout",j="resize",d=j+"-special-event",b="delay",f="throttleWindow";e[b]=250;e[f]=true;$.event.special[j]={setup:function(){if(!e[f]&&this[k]){return false}var l=$(this);a=a.add(l);$.data(this,d,{w:l.width(),h:l.height()});if(a.length===1){g()}},teardown:function(){if(!e[f]&&this[k]){return false}var l=$(this);a=a.not(l);l.removeData(d);if(!a.length){clearTimeout(i)}},add:function(l){if(!e[f]&&this[k]){return false}var n;function m(s,o,p){var q=$(this),r=$.data(this,d);r.w=o!==c?o:q.width();r.h=p!==c?p:q.height();n.apply(this,arguments)}if($.isFunction(l)){n=l;return m}else{n=l.handler;l.handler=m}}};function g(){i=h[k](function(){a.each(function(){var n=$(this),m=n.width(),l=n.height(),o=$.data(this,d);if(m!==o.w||l!==o.h){n.trigger(j,[o.w=m,o.h=l])}});g()},e[b])}})(jQuery,this);
(function ($) {
var options = { }; // no options
......
jquery.flot.selection.js
View file @ c6ddfa56
/*
Flot plugin for selecting regions.
/* Flot plugin for selecting regions of a plot.
The plugin defines the following options:
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
selection: {
The plugin supports these options:
selection: {
mode: null or "x" or "y" or "xy",
color: color
}
}
Selection support is enabled by setting the mode to one of "x", "y" or
"xy". In "x" mode, the user will only be able to specify the x range,
similarly for "y" mode. For "xy", the selection becomes a rectangle
where both ranges can be specified. "color" is color of the selection
(if you need to change the color later on, you can get to it with
plot.getOptions().selection.color).
Selection support is enabled by setting the mode to one of "x", "y" or "xy".
In "x" mode, the user will only be able to specify the x range, similarly for
"y" mode. For "xy", the selection becomes a rectangle where both ranges can be
specified. "color" is color of the selection (if you need to change the color
later on, you can get to it with plot.getOptions().selection.color).
When selection support is enabled, a "plotselected" event will be
emitted on the DOM element you passed into the plot function. The
event handler gets a parameter with the ranges selected on the axes,
like this:
When selection support is enabled, a "plotselected" event will be emitted on
the DOM element you passed into the plot function. The event handler gets a
parameter with the ranges selected on the axes, like this:
placeholder.bind("plotselected", function(event, ranges) {
placeholder.bind( "plotselected", function( event, ranges ) {
alert("You selected " + ranges.xaxis.from + " to " + ranges.xaxis.to)
// similar for yaxis - with multiple axes, the extra ones are in
// x2axis, x3axis, ...
});
The "plotselected" event is only fired when the user has finished
making the selection. A "plotselecting" event is fired during the
process with the same parameters as the "plotselected" event, in case
you want to know what's happening while it's happening,
The "plotselected" event is only fired when the user has finished making the
selection. A "plotselecting" event is fired during the process with the same
parameters as the "plotselected" event, in case you want to know what's
happening while it's happening,
A "plotunselected" event with no arguments is emitted when the user
clicks the mouse to remove the selection.
A "plotunselected" event with no arguments is emitted when the user clicks the
mouse to remove the selection.
The plugin allso adds the following methods to the plot object:
- setSelection(ranges, preventEvent)
- setSelection( ranges, preventEvent )
Set the selection rectangle. The passed in ranges is on the same
form as returned in the "plotselected" event. If the selection mode
is "x", you should put in either an xaxis range, if the mode is "y"
you need to put in an yaxis range and both xaxis and yaxis if the
selection mode is "xy", like this:
Set the selection rectangle. The passed in ranges is on the same form as
returned in the "plotselected" event. If the selection mode is "x", you
should put in either an xaxis range, if the mode is "y" you need to put in
an yaxis range and both xaxis and yaxis if the selection mode is "xy", like
this:
setSelection({ xaxis: { from: 0, to: 10 }, yaxis: { from: 40, to: 60 } });
setSelection will trigger the "plotselected" event when called. If
you don't want that to happen, e.g. if you're inside a
"plotselected" handler, pass true as the second parameter. If you
are using multiple axes, you can specify the ranges on any of those,
e.g. as x2axis/x3axis/... instead of xaxis, the plugin picks the
first one it sees.
setSelection will trigger the "plotselected" event when called. If you don't
want that to happen, e.g. if you're inside a "plotselected" handler, pass
true as the second parameter. If you are using multiple axes, you can
specify the ranges on any of those, e.g. as x2axis/x3axis/... instead of
xaxis, the plugin picks the first one it sees.
- clearSelection(preventEvent)
- clearSelection( preventEvent )
Clear the selection rectangle. Pass in true to avoid getting a
"plotunselected" event.
- getSelection()
Returns the current selection in the same format as the
"plotselected" event. If there's currently no selection, the
function returns null.
Returns the current selection in the same format as the "plotselected"
event. If there's currently no selection, the function returns null.
*/
......
jquery.flot.stack.js
View file @ c6ddfa56
/*
Flot plugin for stacking data sets, i.e. putting them on top of each
other, for accumulative graphs.
The plugin assumes the data is sorted on x (or y if stacking
horizontally). For line charts, it is assumed that if a line has an
undefined gap (from a null point), then the line above it should have
the same gap - insert zeros instead of "null" if you want another
behaviour. This also holds for the start and end of the chart. Note
that stacking a mix of positive and negative values in most instances
doesn't make sense (so it looks weird).
Two or more series are stacked when their "stack" attribute is set to
the same key (which can be any number or string or just "true"). To
specify the default stack, you can set
/* Flot plugin for stacking data sets rather than overlyaing them.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The plugin assumes the data is sorted on x (or y if stacking horizontally).
For line charts, it is assumed that if a line has an undefined gap (from a
null point), then the line above it should have the same gap - insert zeros
instead of "null" if you want another behaviour. This also holds for the start
and end of the chart. Note that stacking a mix of positive and negative values
in most instances doesn't make sense (so it looks weird).
Two or more series are stacked when their "stack" attribute is set to the same
key (which can be any number or string or just "true"). To specify the default
stack, you can set the stack option like this:
series: {
stack: null or true or key (number/string)
}
or specify it for a specific series
You can also specify it for a single series, like this:
$.plot( $("#placeholder"), [{
data: [ ... ],
stack: true
}])
$.plot($("#placeholder"), [{ data: [ ... ], stack: true }])
The stacking order is determined by the order of the data series in the array
(later series end up on top of the previous).
The stacking order is determined by the order of the data series in
the array (later series end up on top of the previous).
Internally, the plugin modifies the datapoints in each series, adding an
offset to the y value. For line series, extra data points are inserted through
interpolation. If there's a second y value, it's also adjusted (e.g for bar
charts or filled areas).
Internally, the plugin modifies the datapoints in each series, adding
an offset to the y value. For line series, extra data points are
inserted through interpolation. If there's a second y value, it's also
adjusted (e.g for bar charts or filled areas).
*/
(function ($) {
......
jquery.flot.symbol.js
View file @ c6ddfa56
/*
Flot plugin that adds some extra symbols for plotting points.
/* Flot plugin that adds some extra symbols for plotting points.
The symbols are accessed as strings through the standard symbol
choice:
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The symbols are accessed as strings through the standard symbol options:
series: {
points: {
......
jquery.flot.threshold.js
View file @ c6ddfa56
/*
Flot plugin for thresholding data. Controlled through the option
"threshold" in either the global series options
/* Flot plugin for thresholding data.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
The plugin supports these options:
series: {
threshold: {
......@@ -9,11 +12,14 @@ Flot plugin for thresholding data. Controlled through the option
}
}
or in a specific series
It can also be applied to a single series, like this:
$.plot($("#placeholder"), [{ data: [ ... ], threshold: { ... }}])
$.plot( $("#placeholder"), [{
data: [ ... ],
threshold: { ... }
}])
An array can be passed for multiple thresholding
An array can be passed for multiple thresholding, like this:
threshold: [{
below: number1
......@@ -23,17 +29,17 @@ An array can be passed for multiple thresholding
color: color2
}]
These multiple threshold objects can be passed in any order since they
are sorted by the processing function.
These multiple threshold objects can be passed in any order since they are
sorted by the processing function.
The data points below "below" are drawn with the specified color. This makes
it easy to mark points below 0, e.g. for budget data.
The data points below "below" are drawn with the specified color. This
makes it easy to mark points below 0, e.g. for budget data.
Internally, the plugin works by splitting the data into two series, above and
below the threshold. The extra series below the threshold will have its label
cleared and the special "originSeries" attribute set to the original series.
You may need to check for this in hover events.
Internally, the plugin works by splitting the data into two series,
above and below the threshold. The extra series below the threshold
will have its label cleared and the special "originSeries" attribute
set to the original series. You may need to check for this in hover
events.
*/
(function ($) {
......
jquery.flot.time.js
View file @ c6ddfa56
/*
Pretty handling of time axes.
/* Pretty handling of time axes.
Copyright (c) 2007-2012 IOLA and Ole Laursen.
Licensed under the MIT license.
Set axis.mode to "time" to enable. See the section "Time series data" in API.txt
for details.
Set axis.mode to "time" to enable. See the section "Time series data" in
API.txt for details.
*/
(function($) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment